EVM Firmware Version Change Log¶
Firmware release binaries can be found in this repository.
FW Version |
Date |
Changes |
Affected HW |
|---|---|---|---|
0200 |
11.06.2015 |
- Prototype release |
VME-EVM-300 |
0201 |
24.09.2015 |
- Added segmented data buffer |
VME-EVM-300 |
Fixed Port 1 TX polarity |
|||
010202 |
01.10.2015 |
- Changed receive FIFO delay target to 00060000 |
VME-EVM-300 |
Added LED test mode (production testing) |
|||
Removed test signals from TBOUT |
|||
010203 |
23.11.2015 |
- Added changes for running with a slower clock on fan-out. |
VME-EVM-300 |
020203 |
18.12.2015 |
- Changes to data buffer forwarding |
VME-EVM-300 |
Changes for rate conversion forwarding, using internal div/2. |
|||
0204 |
12.01.2016 |
- /2 rate conversion working on events, dbuf and dbits. |
VME-EVM-300 |
Improvements to delay measurement system. |
|||
0205 |
13.04.2016 |
- Moved delay compensation segment from segment 0 to |
VME-EVM-300 |
last segment in memory. |
|||
Fixed front panel TTL input order. |
|||
Fixed race condition in segmented memory buffer trans- |
|||
mission that caused dropped software buffers. |
|||
FB0206 |
23.12.2016 |
- Added upstream and downstream event receivers. |
VME-EVM-300 |
Changed beacon event from 0x7A to 0x7E. |
|||
Added topology ID |
|||
Added delay measurement validity information to delay VME-EVM-300 |
|||
compensation data |
|||
000207 |
19.01.2017 |
- Added front panel input phase monitoring and phase |
VME-EVM-300 |
select features. |
|||
Added external AC input synhronisation features. |
|||
010207 |
09.02.2017 |
- Fixed occasional dropped out downstream and upstream VME-EVM-300 |
|
data buffers/segmented data buffers. |
|||
030207 |
03.05.2017 |
- Added RF input monitoring logic to automatically recover |
VME-EVM-300 |
from lost RF signal. |
|||
Added a way to toggle distributed bus transmission |
|||
phase when an external AC synchronisation clock is used. |
|||
040207 |
23.05.2017 |
- Fixed readout of diagnostics information on single |
VME-EVM-300 |
mode transceivers. |
|||
050207 |
26.06.2017 |
- Fixed transceiver_channel to turn off receiver on first |
VME-EVM-300 |
error to prevent propagation of errors up stream. |
|||
070207 |
04.05.2020 |
- Changed VME CSR registers to readback unused bits as zero. |
VME-EVM-300 |
- Fixed bus error on write to fct registers |
|||
- Added external reset for MXC |
mTCA.4 development branch¶
FW Version |
Date |
Changes |
Affected HW |
|---|---|---|---|
070207 |
31.01.2019 |
- Moved MIRQ to 0x1C register. Moved DCDataBuf-Control from 0x1c to 0x30. |
mTCA-EVM-300 |
0A0207 |
15.11.2019 |
- Fixed RX polarity of mTCA-EVM-300 ports 6 and 7. |
mTCA-EVM-300 |
- Defaults for fan-out. |
|||
- Added support for mTCA backplane I/O on trigger bus. |
|||
0B0207 |
15.11.2019 |
- Fixed EVRU/D to EVG signal and added pullup to MOD_SDA. |
mTCA-EVM-300 |
0C0207 |
02.04.2020 |
- Added settings files. |
mTCA-EVM-300 |
- Changed event clock contraint to 6 ns. |
Merging of VME and mTCA.4 development branches¶
FW Version |
Date |
Changes |
Affected HW |
|---|---|---|---|
0C0207 |
11.09.2020 |
- Merge VME tested successfully. |
|
0E0207 |
24.02.2021 |
- Merge mTCA.4 tested successfully. |